Single Component Polyurethane Reactive Hot Melt Comens Bondmelt 950

• Customization: Available
• Bonding Function: Structural Adhesive
• Morphology: Yellow Paste
• Model NO.: Bondmelt 950
• Application: Automobile, Construction, Woodworking
• Material: Polyurethane
• Classification: Room Curing
• Main Agent Composition: Polyurethane Prepolymer
• Characteristic: High Viscosity, Use with Primer, Waterproofing
• Promoter Composition: Complexing Agent
• Composition: Organic Material
• Color: Yellow
• Appearance: Uniform Paste
• Density: 1.25 ± 0.05 Kg/L
• Tack-Free Time (23ºC, 50% Rh): 15 ~ 35 Min
• Rate of Cure (23 ºC, 50% Rh): ≥ 3 mm/24hrs
• Work Temperature: 5 ~ 35 ºC
• Shore a Hardness: ~ 60
• Tensile Strength: ≥ 6 N/mm^2
• Elongation at Break: ~ 300%
• Shear Strength: ≥ 4 N/mm^2
• Tear Strength: ≥ 10 N/mm
• Transport Package: 310ml Cartridge
• Specification: ISO9001/TS16949
• Trademark: Bondmelt
• Origin: China
• HS Code: 3506100090
• Production Capacity: 72000000PCS/Year

Product Description

DESCRIPTION
Comens Bondmelt 950 is a single component, 100% solid component, moisture curing polyurethane reactive hot melt, and have a very good bonding properties to most of the materials , suitable for industrial assembly operation  use, such as automotive, medical equipment and electronic products
 

Product description

Comens Bondmelt 950 is a single component, 100% solid component, moisture curing polyurethane reactive hot melt, and have a very good bonding properties to most of the materials , suitable for industrial assembly operation  use, such as automotive, medical equipment and electronic products.

Characteristics

♦100% solids    ♦Heat resistance and solvent resistance     ♦Opening time 1min      ♦Good rework performance     ♦free of organic solvents, no organic volatile matter VOC release problem

Adhesive substrate

Metals: aluminum, cold rolled steel, stainless steel
Engineering Plastics: PC/ABS, ABS, acrylic resin, polycarbonate, PVC
Composite materials: epoxy, unsaturated polyester, vinyl ester and polyurethane.

Parameters

Note: If the test environment is not explicitly mentioned in the following tests, the test environment is uniform at 24 ±2 ºC, 50 ±5%RH.

parameters	Comens Bondmelt 950
Appearance	Light yellow
Specific gravity	1.1 g/cm3
Solid content	100 %
Viscosity (110 °C)	(4000±1000)mPa•s
Opening time	30s
Time of initial adhesive force/min	5-20/24ºC
Reaction time/d	2-3
Shore D	35
Applicable temperature	-50ºC~80ºC
Form	monocomponent

Note:1. Opening time: the bonding must be carried out during this time, otherwise the bonding effect will be affected.

1. Time of initial bonding force, also known as demoulding time, is affected by environmental temperature, thickness of adhesive layer and size of bonded parts.

Adhesion properties

Note: If the test environment is not explicitly mentioned in the following tests, the test environment is uniform at 24 ±2 ºC, 50 ±5%RH.

Test condition	Testing numerical	Failure mode
Shear strength/24ºC
6061Al/MPa	4.54	CF
PC/MPa	10.64	CF

Note: failure form CF= cohesive failure of adhesive layer.
The shear strength is tested by GBT7124-2008.

V-T curve
Curing speed
Packaging and storage	Comens Bondmelt 950 is packaged in 30 mL PP tube or 310 mL aluminum tube or 5 gallon iron drum and is recommended to be stored at 8-25ºC for 6 months. Storage at 12ºC is helpful to prolong the storage life of the product. Long-term exposure to the environment above 25ºC can shorten the storage life of the product. Do not expose products to high temperature and humidity environment. Recommended storage environment: ventilation, drying and shelter.
Supporting equipment	It is suggested that the equipment recommended by our company (dispensing machine/handheld glue gun/PUR hot melt glue machine) be used for sizing.
Surface cleanliness	In order to achieve the desired adhesive effect, it is recommended to clean up the dirt and oil on the surface of the substrate in the following way: Metal substrate: alcohol wipe 1 times. Plastic substrate: 2 times with alcohol.
Matters needing attention	This product is not inflammable. Wear protective glasses and protective gloves to prevent contact with skin and eyes during use. If you touch the skin carelessly, rinse it with a large amount of soapy water. If you enter the eyes, rinse it with a large amount of clear water for 15 minutes and see a doctor immediately. Please do not swallow. If you are not careful, please seek medical attention immediately. Please store this product in places where children can not reach it. Keep the container closed, away from heat source, open fire, and avoid direct sunlight. For more safety information, please refer to this product MSDS safety data sheet.

DETAILED IMAGE