Two Component Polyurethane Structural Adhesive for Construction Composite Material

• Bonding Faction: Bonding of Composite Materials
• Application: Construction
• Curing Mechanism: Poly Reaction
• Color After Mixing: Black/White
• Density (Polyol): 1.25 G/Cm^3
• Density (Isocyanate): 1.65 G/Cm^3
• Model NO.: Flexibond 8101
• Mix Ratio (by Volume): 1:1
• Application Time (FC): 3-5mins
• Application Time (a): 5-10mins
• Application Time (C): 20-30mins
• Application Time (D): 30-50mins
• Initial Curing Time (FC): 8-13mins
• Initial Curing Time (a): 20-30mins
• Initial Curing Time (C): 50-80mins
• Initial Curing Time (D): 2.5-3.5hrs
• Transport Package: Pallet/Box
• Specification: 300ml a+300ml B Twin Plastic Cartridge
• Trademark: Flexibond
• Origin: China
• HS Code: 3506100090
• Production Capacity: 30000 Tons/Year

Product Description

Description:
Flexibond 8101 is a two-component structural polyurethane sealant, which is mainly used for auto body adhesive of composite materials parts, such as SMC, BMC, RTM, FRP etc. and adhesion of metal materials. It is environmental friendly, contains no volatile solvents.




Characteristics:
(1) Good thixotropy, no sagging
(2) Cures fast under room temperature
(3) Excellent adhesion to substrates, high boding strength and impart resistance
(4) Excellent water, corrosion and weather resistance
.

Technical Data Sheet :

	ComponentA(Resin)	ComponentB(Hardener)
Curing mechanism	Poly addition
Chemical base	Multiplehydroxyl compound	PAPI
Color	Black/White uniform paste	Light yellow uniform paste
The color after mixing	Black/White uniform paste
Density (before curing)	1.25g/cm3	1.65g/cm3
Mixing ratio (by volume)	1	1
Application time (23ºC, 50%RH)	5-15mins
Initial cure time  (23ºC, 50%RH)	20-40mins
Movable and bearing time  (23ºC, 50%RH)	1-1.5h 25
Temperature for application	0ºC-30ºC
Hardness shore D(GB/T 531-2008)	>=65
Shear strength (GB/T 7124-2008)	≥13Mpa (Aluminum alloy)
Shelf life (unopened below 25ºC)	12months	12months

Application Note:
The substrates should be clean and dry and of no grease, dust, or other contaminations. The substrates can be cleaned by alcohol or acetone. Polish is recommended if with aluminum and other difficult adhesion materials.
 

1. Put the cartridge into the manual or pneumatic applicator gun.
2. Remove the stopper at the top the cartridge, and screw the extrusion-type nozzle, and then cut the nozzle into a suitable shape and size according to your need.
3. Start the applicator gun and give up the sealant  for the first 20cm, then apply to the substrates or the place for sealing.
4. Substrates have been coated with adhesive should be pressed within application time, ensure the fully coating of substrate, or the adhesion strength will be affected. Two or more workers are recommended
5. Replace with new nozzle If stop extrusion more than application time, make sure smooth processing
6. After application, put back the stopper with the left sealants, screw tight, sealing well
7. Must use with primer before application

Cleaning:
Recommended Cleaner: Acetone, butanone.

Specification:
Flexibond 8100A: 20kg/drum, Flexibond 8100B: 20kg/drum. The package could be adjust according to the customer's need.
(310ml+310ml) A&B jointed cartridge.





Company Profile:

Production Base:




Automatic Production Lines and Quality Assurance:




Global Sales Network:


Certificates:





COMENS,A FULL RANGE OF SOLUTIONS
FOR MULTIPLE INDUSTRIES