Description:
Quality artificial grass installations are properly seamed and a proper seam requires a quality seaming glue.Flexibond 8010 artificial grass seam glue is a moisture curing, one-component, polyurethane adhesive specifically designed for synthetic grass installations and applications.
This is a popular item for professionals performing artificial grass installation and those who are doing artificial grass installation DIY.
Advantages:
- Non-foaming
- 5 to 10 minute set time
- Ship via common carrier
- Non-flamable (400 degree F flash point)
- Non-hazardous, environmentally friendly.
- Moisture-cured
- No solvent, no odor, environmental friendly (SGS, REACH certificate)
- Good flowability, easy to use, low consumption
- Fast cure, good adhesion and elasticity
- Resistant to hot water, acid, alkali and salt aging
APPLICATION
(1) Preparation
Substrates Preparation
According to the synthetic grass usage, substrates must be prepared according to current regulations and standards.
Synthetic Grass Preparation
Unroll and spread out the synthetic grass for several hours before starting installation to allow internal tension caused by the packaging to be reduced.
Adhesive Preparation
Empty barrel for mixing the adhesive: Must be clean and dry.
Mixing tool: Stick for mixing manually or electric mixer.
Electronic scale.
(2) Applying Process
Apply the adhesive with suitable brush, roller or notched trowel
Coat the adhesive onto the back of the synthetic grass and the joint tape. If only coated on the joint tape, the adhesive consumption should be increased.
The adhesive consumption is 200-500g/m².
After adhesive coated, please press synthetic grass within the adhesive open time. (Please refer to the technical data)
(3) Pressing
Bond synthetic grass joint strips and press within adhesive open time, or the adhesion effect will be affected. Increase the pressure as high as possible without affecting the material forming. After passing the pressing time, then the pressure can be released.
(4) Clean
Recommended Cleaner: dichloromethane, ethyl acetate.
Technical Data Sheet of Flexibond 8010:
*Testing temperature 23ºC and 50% RH
Package:
10kg, 20kg plastic barrel; 600ml sausage
The packaging can be adjusted according to customer's requirement.
Storage and Shelf Life
Storage condition: Please store in the original sealed container, under shady and ventilated condition, avoiding direct sunlight and rain. Recommended storage temperature: 0-30ºC.
Under the above storage condition, the product shelf life is 12 months.
Company Profile:
Production Base:Cleaning: Comens, a full range of solutions for multiple industries.
Certificates:
Cooperation:
Audited Supplier 
){kind=link}
){kind=link}