One Component Polyurethane Adhesive Glue for Wood Sticking and Sandwich Panel Assembly Bonding (Flexibond 8010) Light Brown

Product Description

One Component Polyurethane Adhesive for Panel Bonding (Flexibond 8010)

Description

Flexibond 8010 is a one-component moisture-cure polyurethane adhesive. It is solvent free and environmental friendly. The adhesive cures fast with the characteristics of good adhesion and excellent weather resistance. The product is widely used in various industries such as automobile, ship, refrigerator and many substrates (foam materials, honeycomb materials, plastic, sponge, metal, gypsum plate, PVC, etc).

Characteristics
One component, easy to be applied
Solvent free, environmental friendly
High initial strength
Excellent adhesion performance
Good weathering and UV resistance

Technical Data

Component	Heresy isocynate urethane polymer
Appearance:	Yellow to brown viscous fluid
Density (g/cm3):	1.15±0.05
Solid content (%)	100%
Viscosity (mpa.s, 25ºC)	5000±1000
Tack free(mins,23ºC, 50%RH):	16
Shear strength(MPa)	>8

Usages

Flexibond 8010 is especially applicable for bonding foam materials, honeycomb materials, plastic (e. g PVC), metal, building materials for large areas.

Detailed Image

Process
Cleaning
Make sure that the surface is clean, dry and free of oil, grease dust and contaminants. Thoroughly remove all loose particles and dust. The surface can be cleaned with ethyl ester when necessary.

Application
(1) The adhesive can be applied with glue applicator or scraper and leveling beam. The consumption is around 100-300g/m².Coverage rates depends on the surface of the substrates to be bonded.
(2) The material to be bonded should be laid in a short time (16min, 23ºC) after coating, and then to be pressurized cured.
(3) The adhesive is of one component moisture-cure, so its curing rate is affected by the humidity. The recommend temperature is 15-30ºC, humidity is 30%-80%.
(4) The adhesion effect can be improved if reasonably increase temperature, humidity and pressure.
(5) A little bit water can be sprayed onto the adhesive surface, in order to make curing faster.

Packaging

20kg/pail

 

Storage and Shelf Life

Stored in a cool and dry place (10-25°C is recommended). Avoid damage to the package. When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 9 months.
 

Note

(1) The remaining adhesive cannot be used if viscosity appears too large or its state is like jelly.
(2) Do not apply the product together with other adhesive. Please enquire to our technicians if you have such a need.
(3) The information and recommendations related to the application and end-use of COMENS' products are given in good faith based on COMENS' current knowledge and experience of the products when properly stored, handled and applied under normal conditions. This information must on no account be used as a substitute for necessary prior tests which alone can ensure that a product is suitable for a given use, due to the practical differences in materials, substrates and actual site conditions. User are requested to check that they are in possession of the latest version of this documents and COMENS' is at their disposal to supply any additional information.

FAQ