Pud Water-Based Adhesive for Skyroof, Door Trim, Parcel Shelves, Pillar Trims, Spare Tire Plate, Sun Visor, etc.

• CAS No.: Refer to MSDS
• Bonding Function: Water Based Adhesive
• Morphology: Water-Soluble
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Flexibond 5300
• Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
• Material: Polyurethane
• Classification: Pressure-Sensitive
• Main Agent Composition: Natural Polymer
• Characteristic: Weatherability
• Composition: Organic Material
• Color: White
• Application Field: Vehicle Roof, Door Trim, Luggage Rack
• Application Field2: Pillar Interior
• Bonding Substance: ABS, PC Board, Fiber Sheet, SMC, Wood Composite
• Bonding Substance2: PVC Sheets,Carpets,Leather , Double-Sided Fabrics
• Advantages: Wide Application Range
• Feature: Eco-Friendly and Safety
• Appearance: Milky White Liquid
• Shelf Life: 6months
• Density: 1.01-1.07 g/cm3 (23 ºC)
• Viscosity: 4500±500 MPa.S (23 ºC)
• Solid Content: 50±1%
• Support: OEM and ODM
• Certificates: ISO9001/ISO14001/IATF16949/SGS
• Transportation: by Sea/Air/Express/Train/Land
• Transport Package: Pallet/Pail
• Specification: 20kg/pail
• Trademark: Flexibond
• Origin: China
• HS Code: 3506919090
• Production Capacity: 30000 Tons/Year

Product Description

Description:
Flexibond 5300 is a two-component water based polyurethane adhesive, mainly used for bonding PVC sheets,carpets, fabrics, double-sided fabrics, leather and so on to ABS, ABS/PC board, fiber sheet, SMC, wood composite and other substrates for molding, such as vehicle roof, door trim, luggage rack, pillar interior, etc. This adhesive is very eco-friendly, can be activated at a lower temperature, and has excellent bonding properties.




Technical Data Sheet of Flexibond 5300:

Color	Milky white
Density	1.01-1.07 g/cm3 (23 ºC)
Viscosity	4500±500 mPa.S (23 ºC)
Solid content	50±1%

 

Storage and Shelf Life:

1.The mixed product contains isocyanate, please read MSDS carefully before use.
2.Flexibond 5300 is a water-based product, must store  in the original packaging within the range of 5-35ºC. If the temperature is too low, it will agglomerate; if the temperature is too high, it will cause degradation and weak the adhesion.
3.Under the above storage conditions, the shelf life of the main glue  is 6 months. Because high temperature or transportation bumps may cause rubber to fall into the material on the drum lid or drum wall, the main glue should be filtered before use.

If the  temperature is lower than 5ºC or higher than 35ºC, should ship the main glue with air conditioning or thermal insulation system. Handling and unloading should not stay in outside for too long to prevent agglomeration.

Specification:
20 kg/pail


Note:

1.Check the substrate before gluing, make sure free of oil stains, water stains, dust, volatile substances, etc.; check the spray gun, make  sure nozzle is clean so that to spray glue smooth;
2.Filter the main glue first, then mix with the hardener with ratio 100:5, the speed of the dispersing machine is about 500r/min, and after stirring for 5- 10min, a uniform blue glue solution is formed.
3.Use a pneumatic spray gun to spray glue evenly on the surface of the substrate, the amount of glue is about 80-140g/m2.
4.Put the glued substrate in a 60°C oven or drying tunnel for 5-10 minutes, then coating  while hot.
5.Put the fitting sample into a constant temperature room (23 ± 2ºC, 50%RH) for 72 hours, and it can be used or tested.
6.After the gluing is finished, use the running tap water to clean the spray gun and the storage tank in time, not overnight.
7.The glue that has been mixed with the hardener should be used up within 4-6h. The main glue without hardener can be sealed with a barrel lid and placed in a constant temperature warehouse at 5-35°C, which can be used the next day.

If it is PP/PE and other difficult-to-stick substrates, it must be treated with flame or plasma before gluing.
 

Partners:





Company Profile:

Production Base:




Automatic Production Lines and Quality Assurance:




Global Sales Network:


Certificates:





COMENS,A FULL RANGE OF SOLUTIONS
FOR MULTIPLE INDUSTRIES